Materials

Onyx: The Stone That Glows

How translucent banded calcite becomes a lamp — backlighting specs, panel details and care.

Marble Mart Technical DeskMaterial specification18 July 20266 min read

Onyx does something no other surface material can: it holds light inside itself. Marble reflects light; onyx transmits it — a slab on a backlit panel becomes a lamp.

Calcite, layered slowly

Onyx is banded calcite, deposited layer by layer in mineral springs over thousands of years. Those translucent bands — honey, cream, green, rose — are its signature. It is also the softest stone most projects will ever specify: it behaves like a gemstone at architectural scale, which is exactly why it is reserved for places where it will be seen, lit, and not worked over.

Backlighting, done properly

A backlit panel lives or dies on its light. Cool-white LEDs flatten the banding; a 3000K warm-white source brings out the amber and cream tones. Keep LED strips evenly spaced at 150–200 mm, leave a 40–60 mm cavity, and put a diffusion panel between source and stone so no hot-spots appear. Spec the driver access panel before the stone goes in — servicing a failed LED behind a fixed onyx panel is a demolition job.

Where to use it

Feature walls, bar fronts, reception desks, vanity panels — places where it will be seen, backlit, and not worked with knives or acids. For floors and counters, choose granite.

Care

Seal on installation, refresh yearly, and wipe spills at once; wine, citrus and vinegar etch calcite. Cared for properly, a backlit onyx panel will outlast the lighting system behind it — twice over.

Questions about a material mentioned here? Our team is happy to go into detail.

Ask our team