Specification

Backlit Panels: Specifying Light and Stone Together

Stone, light, cavity and driver — the four decisions that make or break a glowing wall.

Marble Mart Technical DeskMaterial specification26 August 20266 min read

Backlit stone fails for one reason more than any other: the stone and the light are specified by different people, at different times, who never speak. A translucent panel is a single product with two components.

Start with the stone's translucency

Not all translucent stone transmits equally. Onyx and some marbles glow at 40–60 mm thickness; thicker sections or denser material need more light or a thinner panel. Test the actual slab with a light box before finalising the design.

The light

3000K warm white flatters onyx; cooler temperatures suit grey material and modern palettes. LED strips at 150–200 mm centres, on a dimmable driver, with a diffusion panel 40–60 mm off the stone to kill hot-spots.

The cavity

Ventilation matters: trapped heat shortens LED life and can crack stone over thermal cycling. Leave a serviceable cavity with an access panel — drivers fail long before stone does.

Common failures

Hot-spots from wide LED spacing; a stone selected at the yard under daylight then lit at a mismatched temperature; and cavities sealed shut with no service access. Every one of these is avoidable at the drawing stage.

Questions about a material mentioned here? Our team is happy to go into detail.

Ask our team