Design

Stone Staircases: Cantilevers, Cladding and Nosings

Tread thicknesses, concealed shoes, nosing details and the geometry of landings.

Marble Mart Technical DeskMaterial specification9 October 20265 min read

A stone staircase is the most structurally demanding interior use of stone. Treads carry point loads, tolerate impact at every edge, and are expected to look effortless.

Cantilevered treads

The pure form: 30–40 mm treads cantilevered from an RC core with a concealed steel shoe, no visible stringer. The stone is cladding structurally — the steel and core do the work. Alignment is everything; 2 mm of lippage reads as a defect.

Clad staircases

Stone clad over a concrete stair is the practical standard: full tread-and-riser sets with matched nosings, skirting to match. With a good marble — Makrana Albeta wears beautifully — a clad stair outlasts the building's finishes many times over.

Nosings

The nosing takes the traffic. Slightly rounded, honed rather than polished for grip, and — on exterior or pool stairs — grooved. Replacing one tread later is expensive; specifying the nosing right is cheap.

Landings

Landings are the opportunity: a single large slab, a feature inlay, or a book-matched pair at the turn. They are also where the setting-out must be exact — the landing absorbs every accumulated tolerance of the flight.

Questions about a material mentioned here? Our team is happy to go into detail.

Ask our team